Unpacking the Miter Saw
To avoid severe pinching,
never lift or move this saw
by gripping any component of the mechanism
support system.
When removing this tool from packaging materi-
als, reach down to the two side carry-handle lo-
cations and slowly lift until it clears the package.
Fig. 4
Loose Parts
Torx Wrench (41)
2 Base Extensions (16)
4 Torx Screws for Base
Extensions
16099221PJ GCM18V-10SD OSI 20220506.indd 16
Unpacking and Checking Contents
2 Workpiece Clamps
(42)
Checking Contents in Package
Open the top of the package and look for the
included loose parts (Fig. 4).
Some small parts must be attached to the tool
before it is ready for use.
Check off each part.
Dust Bag (36)
Miter Lock Knob (20)
-16-
Operating/Safety
Instructions
5/6/22 11:42 AM