Information For All Products; Electrical Installation; Maintenance; Supplement For Disposal - SICK DUSTHUNTER C200 Instrucciones De Operación

7

Information for all products

7.1

Electrical installation

7.1.1 Connecting the power connection
7.2

Maintenance

7.3

Supplement for disposal

7.3.1 Disposal of batteries
8017305/AE00/V1-0/2022-09| SICK
Subject to change without notice
For 24 V voltage supply, install external SELV or PELV power supply unit:
– DUSTHUNTER SB30
– DUSTHUNTER SP30
– MCU and MCUDH control unit
– MCU remote control unit (remote unit)
– MCUDH remote control unit (remote display 100)
For 230 V power supply, install a 16 A external power fuse:
– FWE200DH
– MCU and MCUDH control unit
– MCU remote control unit (remote unit)
NOTE: Function check-out after completed maintenance
– The safety of the device must be checked with a function check-out.
– The function check-out must comply with local regulations.
The following components contain a battery.
Product
DUSTHUNTER SB30
DUSTHUNTER SB30/50/100
DUSTHUNTER SP30
DUSTHUNTER SP100
DUSTHUNTER SP100 Ex-2K
DUSTHUNTER SP100 Ex-3K
Combiprobe CP100
DUSTHUNTER T50/100/200
DUSTHUNTER C200
FWE200DH
NOTE:
Batteries must not be disposed of with household waste.
Observe the respective valid local regulations for disposal.
A D D E N D U M T O O P E R A T I N G I N S T R U C T I O N S | Dust measuring devices and Combined probe
INFORMATION FOR ALL PRODUCTS
Component
Sender/receiver unit
MCU control unit
MCUDH Ex-3K control unit
MCU control unit
MCUDH Ex-3K control unit
MCU control unit
Measuring and control unit (MCU control unit)
7
EN
19