Symbols; Safety Warnings - Festool RG 130 ECI Manual De Instrucciones

Contents
1 Symbols..................................................... 17
2 Safety warnings.........................................17
3 Intended use..............................................20
4 Technical data........................................... 20
5 Parts of the device.....................................21
6 Commissioning..........................................21
7 Working with the electric power tool........23
8 Service and maintenance..........................23
9 Storage...................................................... 24
10 Accessories............................................... 24
11 Environment.............................................. 24
12 General information.................................. 24
1

Symbols

Warning of general danger
Warning of electric shock
Read the operating instructions and
safety instructions.
Wear protective goggles and ear pro­
tection.
Wear a dust mask.
Wear protective gloves when changing
tools!
Always operate with two hands.
Pull out the mains plug
Safety class II
CE marking: Confirms the conformity
of the power tool with the European
Community directives.
UKCA marking: The United Kingdom
Conformity Assessed symbol is a
marking for products being placed on
the market in the United Kingdom. It is
a manufacturers indication that the
product is in conformance with the rel­
evant regulations in the UK.
Direction of rotation of the grinding
wheel
Do not dispose of it with domestic
waste.
Tool contains a chip which stores data.
See section 12.1
Tip or advice
Handling instruction
2

Safety warnings

2.1 General power tool safety warnings
WARNING! Read all safety warnings, in­
structions, illustrations and specifica­
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
2.2 Safety instructions for grinding
This power tool is intended to function as a
-
grinder. Read all safety warnings, instruc­
tions, illustrations and specifications pro­
vided with this power tool. Failure to fol­
low all instructions listed below may result
in electric shock, fire and/or serious injury.
Operations such as sanding, wire brush­
-
ing, polishing, hole cutting or cutting-off
are not to be performed with this power
tool. Operations for which the power tool
was not designed may create a hazard and
cause personal injury.
- Do not convert this power tool to operate
in a way which is not specifically designed
and specified by the tool manufacturer.
Such a conversion may result in a loss of
control and cause serious personal injury
Do not use accessories which are not spe­
-
cifically designed and specified by the tool
manufacturer. Just because the accessory
can be attached to your power tool, it does
not assure safe operation.
- The rated speed of the accessory must be
at least equal to the maximum speed
marked on the power tool. Accessories
running faster than their rated speed can
break and fly apart.
The outside diameter and the thickness of
-
your accessory must be within the capaci­
ty rating of your power tool. Incorrectly
sized accessories cannot be adequately
guarded or controlled.
English
17