Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Push the rotary PUSH knob (6) for 3 seconds to
1.
Turn the rotary PUSH knob (6) or use UP/DN buttons (18) on the microphone
to
select
the KEyBEEP menu.
2.
Push the rotary PUSH knob (6) to
display.
3.
Turn the rotary PUSH knob (6) or use UP/DN buttons (18) on the microphone
activate
deactivate
to
On /
Of the function.
4.
New Push the rotary PUSH knob (6) to validate. The parameter stops blinking.
a) Go back to point 1 to
adjust
(17) to
validate
and
exit
MENU.
5.
If no key is pressed, the unit
exits
the display.
Default KEY BEEP is On.
4) ROGER BEEP
When the function is active, the icon
The Roger Beep
sounds
when the PTT switch (17) on the microphone is re-
leased in order to let your correspondent speak. Historically as transceiver
is a "simplex" communication mode, it is not possible to speak and to listen
at the same time (as it is the case with a telephone). Once someone had
finished talking, he said "Roger" in order to prevent his correspondent that
it was his turn to talk. The word "Roger" has been replaced by a significant
beep. There comes "Roger beep" from.
Push the rotary PUSH knob (6) for 3 seconds to
1.
Turn the rotary PUSH knob (6) or use UP/DN buttons (18) on the microphone
to
select
the RG BP menu.
2.
Push the rotary PUSH knob (6) to
3.
Turn the rotary PUSH knob (6) or use UP/DN buttons (18) on the microphone
activate
deactivate
to
(On*) /
4.
New Push the rotary PUSH knob (6) to validate. The parameter stops blinking.
a) Go back to point 1 to
adjust
validate
exit
MENU.
(17) to
and
5.
If no key is pressed, the unit
exits
the display.
*When the function is On, you can select 5 other ROGER BEEP tones continu-
ing to turn the rotary PUSH knob (6).
Default ROGER BEEP is Of.
5) TONE
The TONE function is used to
change
-5 to +5.
enter
MENU.
is displayed.
validate.
The current status blinks on the
another function or b) Press the PTT switch
disappears.
MENU after 10 seconds,
disappears in
appears on the display.
enter
MENU.
is displayed.
validate.
The current status blinks on LCD.
(Of) the function.
another function or b) Press the PTT switch
disappears.
MENU after 10 seconds,
disappears in
the tone on reception. 11 levels from
Push the rotary PUSH knob (6) for 3 seconds to
1.
Turn the rotary PUSH knob (6) or use UP/DN buttons (18) on the microphone
to
select
the TONE menu.
2.
Push the rotary PUSH knob (6) to
LCD.
3.
Turn the rotary PUSH knob (6) or use UP/DN buttons (18) on the microphone
select
to
a new value.
4.
New Push the rotary PUSH knob (6) to validate. The parameter stops blinking.
a) Go back to point 1 to
adjust
(17) to
validate
and
exit
MENU.
5.
If no key is pressed, the unit
the display.
Default TONE is 0.
6) EMG SET 1
set
Allows to
the Priority Channel 1.
Push the rotary PUSH knob (6) for 3 seconds to
1.
Turn the rotary PUSH knob (6) or use UP/DN buttons (18) on the microphone
select
the EMG 1 menu.
to
2.
Push the rotary PUSH knob (6) to
3.
Turn the rotary PUSH knob (6) or use UP/DN buttons (18) on the microphone
select
the channel.
to
4.
Push the rotary PUSH knob (6) to
LCD.
5.
Turn the rotary PUSH knob (6) or use UP/DN buttons (18) on the microphone
to
select
the modulation mode AM or FM.
6.
New Push the rotary PUSH knob (6) to validate. The modulation mode stops
blinking. a) Go back to point 1 to
validate
switch (17) to
and
7.
If no key is pressed, the unit
the display.
Default Priority channel 1 is 9 AM.
See § PRIORITY CHANNELS page 9.
7) EMG SET 2
set
Allows to
the Priority Channel 2.
Push the rotary PUSH knob (6) for 3 seconds to
1.
Turn the rotary PUSH knob (6) or use UP/DN buttons (18) on the microphone
to
select
the EMG 2 menu.
Points 2 to 7 are identical to § EMG SET 1.
11
enter
MENU.
validate.
The value of the tone blinks on
another function or b) Press the PTT switch
disappears.
exits
MENU after 10 seconds,
disappears in
enter
MENU.
validate.
The channel blinks on LCD.
validate.
The modulation mode blinks on
adjust
another function or b) Press the PTT
exit
MENU.
disappears.
exits
MENU after 10 seconds,
disappears in
enter
MENU.
is displayed.
is displayed.
is displayed.
Publicidad
Tabla de contenido
