Owner And Operator Obligations; Intended Use; Warranty; Transport And Storage - HURNER SPG 2.0 Manual De Instrucciones

H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
2.4

Owner and Operator Obligations

• The product may be operated exclusively by persons who
are familiar with the applicable rules, the guidelines for
the prevention of accidents, and the User's Manual. The
owner/manager shall provide the worker operating the
system with the User's Manual and shall make sure that
the operator reads and understands it.
• The system may be operated only when observed. Weld-
ers must have been briefed properly on the operation
of the system or must have participated in a dedicated
training. The operating/owning organization engages
to check and make sure at reasonable intervals that the
system is operated by the welders as intended and un-
der proper guidelines of occupational safety.
• The product must be operated only when in proper state
of repair and for one of the intended uses. Before weld-
ing, the welder is required to make sure that the state
of the system is in order.
The dust cap for the data communications interface
port has to cover the port during operation, in or-
der to keep humidity and contaminations away.
Important
2.5

Intended Use

The data logger is intended exclusively for controlling and
recording butt-welding processes with heating element per-
formed with machines that are compatible with it and can
be connected to it.
The notion of intended use also includes:
• Compliance with the instructions in the User's Manual
• Observation of all service and maintenance intervals
All uses other than the ones mentioned above are
unacceptable and will cancel any and all liability or
warranty assumed by the manufacturer. Unintend-
Important
ed use may cause considerable hazards and material
damage.
2.6

Warranty

Warranty claims may be raised only if the conditions for
warranty given in the General Terms and Conditions of Sale
and Delivery obtain.
2.7

Transport and Storage

The product ships in a transport box. It should be stored and
transported in that box at any time.
Version November 2022 HÜRNER SPG 2.0 User's Manual 7
EN