Comfort Pillow; Seat Position - Britax ADVOCATE Guia Del Usuario

Britax Child Safety, Inc.

Comfort Pillow

The comfort pillow is
designed to provide better fit
and comfort for infants using
this child seat.
NOTE: Remove the
comfort pillow after the
child can sit comfortably
in the child seat without
additional support.

Seat Position

This child seat has seven (7)
recline positions. To adjust
the recline position:
1. Pull the recline handle
then rotate the child seat
shell until the recline
indicator ball is in the
correct position for the
specific installation
(See Using the Recline
Indicator below).
2. Release the recline handle, then verify the child seat has
locked into position.
NOTE: Set the seat position BEFORE installing.
Using the Recline Indicator
• Rear Facing Installations -
It is important that the child
seat be properly reclined.
Use the recline indicator on
the child seat to help achieve
an acceptable recline angle
for:
‐ infants and children with
no head and neck control -
recline indicator ball in the light blue section.
‐ older children with proper head and neck control - recline
indicator ball in light blue or dark blue.
NOTE: If necessary, the proper recline angle can be
achieved by placing a rolled towel or pool noodle in
the vehicle seat bight.
• Forward Facing Installations - Use the recline indicator on the
child seat to help achieve an acceptable recline angle, with the
recline indicator ball in the green section.
26
Toddler
Table of Contents
Infant