Britax ADVOCATE Guia Del Usuario página 37

6. Remove the head restraint.
a. Loosen the harness
and raise the harness to
the highest position.
b. Detach the elastic
straps from the rear of
the head restraint.
NOTE: Your select cover
set may have more than
one elastic strap.
7. Ensure the CLICKTIGHT is
open and remove the lower
seat pan cover.
a. Detach elastic loops at
front of shell.
b. Lift up from the front to
remove the lower seat
pan cover.
c. Pull cover up at sides
and around rear-facing
belt paths.
8. Lower the harness, reach
around the head restraint,
head pad and pull the upper
seat pan cover towards you
to remove.
Replacing the Cover
1. Attach one side of the
upper seat pan cover at
the forward-facing belt
path, pull the cover over
the back of the shell, and
secure at opposite belt
path.
2. Replace lower seat pan
cover.
a. Open the
CLICKTIGHT.
b. Tuck one of the
plastic tabs on the
lower seat pan cover
into the outer side of
the shell between the
forward and rear-
facing belt paths.
ADVOCATE/BOULEVARD CLICKTIGHT User Guide
6b
2a
2b
Table of Contents
7a
7b
35