Britax ADVOCATE Guia Del Usuario página 19

7. Hold harness straps up
and away from seat while
closing the CLICKTIGHT.
NOTE: A click
helps confirms the
CLICKTIGHT is secure.
8. Attach the tether to a
designated anchor (see
vehicle owner's manual)
and remove slack (see
page 30).
Forward-Facing Installation with Lower Anchors
9 Logo on the CLICKTIGHT dial has returned to a horizontal
position.
9 All connections are secure and straps are not twisted.
9 Child seat base is be flat on vehicle seat and is parallel to
vehicle seat.
9 Recline indicator ball is within the allowable green section
and that no more than 3 in. (7.5 cm) of the base hangs over
the edge of the vehicle seat (see page 26).
9 Child seat cannot be moved front to back or side to side
more than 1 in. (2.5 cm) at the belt path. If the child seat
is not secure, repeat installation or use a different seating
location.
9 Excess top tether webbing is contained within your vehicle
and secured.
9 The anti-rebound bar is removed.
ADVOCATE/BOULEVARD CLICKTIGHT User Guide
NOTE ADVOCATE ONLY: Do
not install by this method for
a child weighing more than
35 lbs (15.8 kg).
NOTE BOULEVARD ONLY:
Do not install by this method
for a child weighing more
than 40 lbs (18 kg).
Table of Contents
17