Harness Buckle - Britax ADVOCATE Guia Del Usuario

c. Turn the buckle
retainer sideways,
route it through the
front buckle slot
and into the desired
buckle position in the
child seat.
4. Pull the seat pan cover
around the CLICKTIGHT
bezel and over the front
of the seat.
IMPORTANT:
pan cover is tucked behind the
CLICKTIGHT bar.
5. Reattach the two elastic
loops on the underside of
the seat pan cover.
6. Replace the head
restraint cover.
a. Loosen the harness
and raise the head
restraint to the
highest position.
b. Reattach the elastic
straps to the rear of
the head restraint.
NOTE: Your select cover
set may have more than
one elastic strap.
c. Reattach the hook
and loop fasteners
on the head restraint
around the harness.
7. Replace the comfort
pads.

Harness Buckle

IMPORTANT:
seat, you will need to check the buckle periodically and rinse
out any accumulated debris (see page 43).
ADVOCATE/BOULEVARD CLICKTIGHT User Guide
Ensure the seat
If your child eats and drinks while in the child
3c
6b
6c
Table of Contents
37