Alarm Settings; Weather Forecast - Emos E5005 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 100
Atmospheric pressure – History
The station shows atmospheric pressure in hPa or inHg and keeps a history of pressure readings for
the last 12 hours in field no. 16.
Moving the weather station to another place will affect the measured values.
Measurement will stabilise within 12 hours of battery insertion or weather station moving.
Press the HISTORY button repeatedly to gradually display the pressure values for the last 12 hours.
The measured value + time difference will be displayed in fields no. 15, 16.
Information
After 20 seconds, the station will switch from settings mode back to standard mode once the setting
process is complete.
Temperature, Humidity and Pressure Trends
indicator for
temperature, humidity
and pressure trends
Moon Phases
The moon phase is displayed in field no. 14.
Icons for the main phases of the moon are as follows:
new
waxing
moon
crescent
Displaying Maximum and Minimum Readings of Temperature and Humidity
Press the
MEM button repeatedly to gradually display the maximum and minimum readings of
temperature and humidity.
Holding the
MEM button while viewing MAX/MIN values will erase the memory.

Alarm Settings

2 alarms can be set on the weather station.
Pressing the MODE button will display the time for alarm A1. The selection will be shown in field no. 21.
While showing the alarm time, hold the MODE button and use
desired alarm time.
Activate the alarm by pressing
After activation, the alarm will be indicated by icon
Pressing
MEM or
HISTORY again while displaying alarm time will deactivate the alarm and the
icon will disappear.
The same procedure is used for setting up alarm A2 (icon
Snooze and Display Backlight Functions (SNOOZE/LIGHT)
The alarm ringing can be delayed by 5 minutes using the SNOOZE•LIGHT button located on the top
part of the weather station.
Press the button when the alarm starts ringing. The alarm icon will be flashing.
To cancel the SNOOZE mode, press any other button – the bell icon will stop flashing and will remain
on the screen.
The alarm will be re-activated the next day.

Weather Forecast

The station forecasts weather on the basis of changes in atmospheric pressure for the next 12–24 hours
for an area within the range of 15–20 km.
The accuracy of weather forecast is 70–75 %. The forecast icon is displayed in field no. 11.
rising
first
waxing
full moon
quarter
gibbous
MEM or
HISTORY while displaying alarm time in field no. 21.
7
constant
waning
last
gibbous
quarter
MEM and
HISTORY to set the
in field no. 19.
).
falling
waning
crescent

Publicidad

Tabla de contenido
loading

Tabla de contenido