Weather Forecast - Emos E5101 Manual De Instrucciones

• If the temperature limit is exceeded, an alarm will sound (beeping) and the temperature value
will begin flashing.
• Press any button to silence the beeping.
• The lower temperature limit must be at least 1 °C lower than the upper temperature limit.

Weather Forecast

The station forecasts weather on the basis of changes in atmospheric pressure for the next 12–24 hours
for an area within the range of 15–20 km.
The accuracy of weather forecast is approximately 70 %. As the weather forecast may not be 100 %
accurate, neither the manufacturer nor the seller can be held responsible for any loss caused by an
incorrect forecast. When you first set or reset the weather station, it takes approximately 12 hours
before the weather station begins forecasting correctly. The weather station shows 5 weather
forecast icons.
Note: Currently displayed icon means a forecast for the next 12–24 hours. It may not reflect the
current state of the weather.
Sunny
Atmospheric Pressure/History
The station shows the current atmospheric pressure value in hPa/inHg and keeps a history of pressure
readings for the last 12 hours in field no. 21 (repeated pressing of the HISTORY button). The chart of
pressure history is animated. Moving the weather station to another place will affect the measured
values. Measurement will stabilise within 12 hours of battery insertion or station relocation.
• To set the altitude, hold the "HISTORY" button for 3 seconds. The altitude value on the screen
will start flashing.
• Use the " ", " " (C and D) buttons to input the altitude of your location and confirm by pressing
the History (E) button.
• The weather forecast icon will start flashing; use the " ", " " (C and D) buttons to select the
current weather.
Screen Illumination
Press the SNOOZE/LIGHT push-button to activate screen illumination. When the station is only running
on batteries, the screen will illuminate for 10 seconds.
When powered via the adapter:
The screen will be illuminated permanently.
Press SNOOZE/LIGHT again to activate/deactivate screen illumination.
Setting Screen Illumination Mode
• Hold the "SNOOZE/LIGHT" button for 2 seconds to select the illumination mode (a/b/c icon in
field no. 1 flashes).
• Press the " " button repeatedly to select illumination mode a/b/c.
Mode A
• You can manually choose the colour of screen illumination. Repeatedly pressing the "SNOOZE/
LIGHT" button switches between individual colours: red – green – blue – yellow – purple – light
blue – white.
• Press "MODE" to confirm your selection.
Mode B
• Shows colour based on the Weather Forecast function: yellow (sunny)- red (cloudy) – green
(overcast)– blue (rain) – purple (heavy rain). Press "MODE" to confirm your selection.
Cloudy Overcast
7
Rain Heavy rain