Weather Forecast - Emos E8647 Manual De Instrucciones

Snooze Function
You can postpone an active alarm by 5 minutes by pressing the SNZ/
LIGHT button located on the top of the station.
Press the button when the alarm starts ringing. The icon will be
displayed and Zz will be flashing.
To cancel the SNOOZE function, press any other button while the
alarm is ringing – the Zz icon will stop flashing and the icon will
remain on the screen.
The alarm will trigger again the next day.
If you do not press any button while the alarm is ringing, the ringing
will stop automatically after 2 minutes.
Displaying Maximum and Minimum Temperature and
Humidity Readings
Press the button repeatedly to gradually display the maximum and
minimum readings of indoor and outdoor temperature and humidity.
The memory of measured values is automatically erased every
day at 00:00.
To manually erase the memory of measured values, long-press the
button while in the max/min value display mode.

Weather Forecast

sunny cloudy overcast rain snow
The station uses changes in temperature and humidity to forecast
weather for the next 12–24 hours for an area within the range of
15–20 km.
The accuracy of the weather forecast is approximately 50 %. As the
weather forecast may not be 100 % accurate, neither the manufac-
turer nor the seller can be held responsible for any loss caused by an
incorrect forecast. When you first set or reset the weather station, it
takes approximately 12 hours before the weather station begins fore-
casting correctly. The weather station shows 5 weather forecast icons.
8