Identification Data; Identification Label Of The Charging Unit; Identification Data Of The Handpiece - Mectron starlight pro Manual De Uso Y Mantenimiento

2 IDENTIFICATION DATA
A correct description of the model and of the serial number of the device will allow the After
Sales Service to provide fast and effective answers.
Always provide this information every time that you contact MECtrON After Sales Service.
2.1 Identification Label of the Charging Unit
Each charging unit is provided with an identification label (see Figure 2 at page 7) on which
the main technical specifications and the lot number are reported. the identification label is
placed to the underside of the equipment. The complete technical data are reported in
11 on page 25 .
NOTE: The complete list of symbols is reported in Chapter 9 on page 23.
Figure 2 – Identification Label of the Charging Unit
2.2 Identification Data of the Handpiece
On the handpiece are reported some symbols (see
number (see Figure 3 at page 7).
NOTE: The complete list of symbols is reported in Chapter 9 on page 23.
starlight pro
-CHARGER-
100-230 V~ 50/60 Hz 15 VA
00000000
YY000000
Data Matrix HIBC 128
Figure 3 – Identification Data of the Handpiece
IDENtIFICAtION DAtA
manufacturer
Mectron S.p.A.
via Loreto 15/a
YYYY-MM
Carasco -GE- Italy
made in Italy
Chapter 9 on page 23
SN
Data Matrix HIBC 128
starlight pro
Chapter
) and the serial
7