Drawer Bottom; Black 1/2" Flat Head Screw - Sauder Hammond 423527 Manual De Instrucciones

Step 28
1 1

BLACK 1/2" FLAT HEAD SCREW

(6 used in this step)
X
2
2
å
Fasten the EXTENSION SLIDES (2) to the SMALL
DRAWER SIDES (X and Y). Use six BLACK 1/2" FLAT
HEAD SCREWS (28). Use the exact holes shown in the
upper view.
3
Y
T
å
Slide the DRAWER BOTTOM (W) into the grooves in the
SMALL DRAWER SIDES (X and Y) and SMALL
DRAWER BACK (T).
423527
2
28
These
holes
must be
here.
Open end
These
holes
must be
here.
Y
With the palm of
your hand, tap
the DRAWER
BOTTOM down
into the grooves.
W
X
www.sauder.com
2 2
BLACK 1-3/8" FLAT HEAD SCREW
T
X
å
Fasten the SMALL DRAWER SIDES (X and Y) to
the SMALL DRAWER BACK (T). Use four BLACK 1-3/8"
FLAT HEAD SCREWS (23).
4
X
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
FRONT groove.
å
Fasten the SMALL DRAWER FRONT (V) to the SMALL
DRAWER SIDES (X and Y). Tighten two HIDDEN CAMS.
å
Fasten a KNOB SET (10) to the SMALL DRAWER FRONT (V).
Use a BLACK 1" MACHINE SCREW (25).
23
(4 used in this step)
Y
Groove
25
BLACK 1" MACHINE SCREW
(1 used in this step)
Y
V
10
Page 33