Dogtra Europe YS300 Manual De Instrucciones página 18

ON-OFF &
Intensity Dial
ON-OFF & Intensity Dial
The ON-OFF & Intensity Dial on the collar is used to turn
the YS300 on and off, to select the intensity level, and to
test the YS300.
Set the ON-OFF & Intensity Dial on the "OFF" position to
turn off the YS300.
Level P(non-stimulation) causes the collar to only vibrate.
Level 2 is lowest electrical stimulation and Level 7 is the
highest. From Level 2 to Level 7, a vibration is followed by
stimulation.
30
Set the ON-OFF & Intensity Dial on TEST position as
shown above to test the YS300 (See "TESTING THE
ANTI-BARK COLLAR" on page 35).
ON-OFF & Intensity Dial
OFF
P
2~7
TEST
NOTICE : When first using the YS300, it is recommended
that you start with the lowest level. If the dog continues
to bark, gradually increase the intensity level.
Function
Power OFF
Vibration only(non-stimulation)
Stimulation follows a vibration
Test the ANTI-BARK COLLAR
31