Lavorwash EVO 850 Manual De Instrucciones página 46

Clean the recovery tank with clean water:
Detach the lever closures, ITEM 40 FIG . 4, lift the cover, ITEM 27 FIG . 3, and keep it supported by the appropriate
support rod (FIG. 9).
Detach the lever closure hooks of the recovery tank (ITEM 40 FIG. 4), remove the safety cable (FIG. 9 A) and
bring the tank to the position shown in FIG . 9 B .
FIG. 9 A
BEFORE RELEASING THE CABLE FIG. 9 A AND LOWERING THE RECOVERY TANK MAKE
SURE THAT IT HAS BEEN COMPLETELY EMPTIED.
Once this maintenance has been completed, proceed in reverse to perform the operations described above .
Remove the floor squeegee, ITEM 30 FIG. 4, loosening the knobs, ITEM 1 FIG. 10, and wash it with hot water
– SEE "CHECKING, CLEANING AND MAINTAINING THE FLOOR SQUEEGEE" –
CLEANING THE RECOVERY TANK
FIG. 9
FIG. 9 B
46