Lavorwash EVO 850 Manual De Instrucciones página 57

Check the condition of the external pipes (ITEM 1 FIG. 26) which must not contain any foreign objects as these
could obstruct the flow of water.
FIG. 26
1
In the event of a decrease in the suction power, check the condition of the fittings indicated in FIG.27.
To remove the pipes:
FIG. 27
Loosen the metal clamp with a socket wrench and inspect the fitting. If necessary wash thoroughly with a water
pipe . If the problem persists, proceed with physical disassembly of the pipes:
Remove the protective casing of the suction cover using the relevant screws .
Unscrew the clamps and remove the pipes from the lower part of the machine and proceed to wash them .
57