Remove the collection container, ITEM 8 FIG . 3, of the washing unit, lifting the lever, ITEM 5 FIG . 3, and clean
it thoroughly .
Store the machine in a clean and dry place inside . Do not expose to frost .
Leave the tanks open for adequate ventilation .
Move the main key switch, ITEM H FIG. 2, to the "OFF" position and remove the key. Finally, disconnect
the power cable from the batteries.
CHAPTER 13 - STANDARD INSPECTION AND MAINTENANCE PROGRAMME
THE FOLLOWING PROGRAM VARIES ACCORDING TO THE FREQUENCY OF USE, THE TYPE
OF FLOOR AND THE TYPE OF DIRT TO BE CLEANED.
•
DAILY
TANKS CHECKING AND CLEANING
FLOOR SQUEEGEE CLEANING CHECK
CLEANING THE WASHING UNIT COLLECTION CONTAINER
FOOD SECTOR IN CASE OF DIRECT CONTACT WITH ORGANIC WASTE:
RECOVERY TANK DISINFECTION
•
WEEKLY
CHECK THE WATER LEVEL OF THE BATTERY ELEMENTS
CLEAN WATER FILTER INSPECTION AND CLEANING. (ITEM 37 FIG. 12)
PURGE THE CLEANING DUCTS WHENEVER DIFFERENT DETERGENTS ARE USED AND CLEAN THE FILTER OF THE
SUCTION TUBE .
•
MONTHLY
CHECK THE STATE OF WEAR OF THE WASHING UNIT BRUSH, IF NECESSARY REPLACE IT .
MAINTENANCE OF THE FRONT RUBBER OF THE WASHING UNIT
CHECK THE WEAR CONDITION OF THE SIDE BRUSH, IF NECESSARY REPLACE IT .
47