Parkside PAT 4 D5 Traducción Del Manual De Instrucciones Original página 68

Pull back on the pusher
Add staples to the magazine
After adding staples, slide the pusher
zine is fully closed. Release the release button
4
and lock into place for the magazine
Note: Use the window on the fill indicator
zine is empty.
4
Adding nails
Set the On / Off switch
the product.
Turn the product over.
Squeeze the release button
Pull back on the pusher
Follow icon shown on pusher
magazine
4
After adding nails, slide the pusher
is fully closed, (see Fig C).
4
Release the release button
the magazine
Note: Use the window on the fill indicator
magazine
4
Functions
Stapling & Nailing
Set the On / Off switch
Press the safety contact
Squeeze the trigger
piece to drive a staple / nail into it.
68 GB/MT
(see Fig. B).
3
4
to the "0" position before working on
8
3a
(see Fig. B)
3
3
(see Fig. C)
. It must click and lock into place for
3a
to be closed correctly.
4
is empty.
to the "I" position to switch the product on.
8
into the work piece.
6
whilst holding the product against the work
1
(see Fig. C).
in again until the maga-
3
to be closed correctly.
4
to see if the maga-
5
(see Fig. B).
(see Fig. C) and add nails to the
in again until the magazine
3
to see if the
5
. It must click
3a