Sony CDX-M P450X Manual De Instrucciones página 13

Playing t he st ored program
During playback, press (3) (PGM ).
Program Play starts.
To return to normal play mode, select
"PGM -OFF."
Note
" NO DATA" appears in t he display if no t rack is
st ored in t he program.
Erasing an ent ire program
1
During playback, press (MENU) , then
press either side of (FLDR/PRESET)
repeatedly until " PGM -SET " appears.
2
Press (ENTER) .
3
Press the ( – ) side of (FLDR/PRESET)
repeatedly until " ERASE-ALL " appears.
4
Press (ENTER) for 2 seconds.
The entire program is erased.
5
Press (MENU) tw ice.
Downloaded from: https://www.usersmanualguide.com/
Adding t racks t o t he program
1
During playback, press (MENU) , then
press either side of (FLDR/PRESET)
repeatedly until " PGM -SET " appears.
2
Press (ENTER) .
When adding a track to the end of a
program, skip step 3.
3
Press either side of (FLDR/PRESET)
repeatedly to select the program number
w here you w ant to insert a new track.
4
Press (SEEK) to select the new track.
5
Press (ENTER) .
The selected track is inserted at that
program number, and the succeeding
tracks are renumbered.
To continue inserting tracks, repeat steps 3
to 5.
6
Press (MENU) tw ice.
Note
Once all 20 slot s have been f illed, " **FULL**"
appears in t he display, and you cannot insert more
t racks.
Erasing t racks in a program
1
During playback, press (MENU) , then
press either side of (FLDR/PRESET)
repeatedly until " PGM -SET " appears.
2
Press (ENTER) .
3
Press either side of (FLDR/PRESET)
repeatedly to select the program w ith
the track number you w ant to erase.
4
Press (ENTER) for 2 seconds.
The selected track is erased, and the
succeeding tracks are renumbered.
5
Press (MENU) tw ice.
Program No.
13