Sd Menu - Sony BRC-H900 Manual De Instrucciones

SD Menu

This menu only appears when an optional BRBK-SA1
Analog SD Output Card is installed in the
BRC-H900 HD Color Video Camera or in the
BRU-SF10 HD Optical Multiplex Unit.
< O P T I O N C A R D >
> D - S U B O U T P U T 1
D - S U B O U T P U T 2
I M G S I Z E
S E T U P
D-SUB OUTPUT1
Select the signal output from the RGB/SYNC connector
(D-sub 9-pin) on the BRBK-SA1 Analog SD Output
Card.
YCbCr: Outputs analog component signals.
RGB: Outputs RGB signals.
ADD SYNC
Appears when RGB is selected with D-SUB OUTPUT1
and specifies whether to add a sync signal.
RGB: Output R, G, and B signals with a sync signal
added.
OFF: Output R, G, and B signals with no sync signal
added.
D-SUB OUTPUT2
Select the signal output from the RGB/SYNC connector
(D-sub 9-pin) on the BRBK-SA1 Analog SD Output
Card.
VBS: Outputs analog composite signals.
Y/C: Outputs S-video signals.
IMG-SIZE (image size)
Select the aspect ratio of the output signal.
16:9[LETTER]: The image is displayed in 16:9
letterbox.
4:3[CROP]: The image is displayed in 4:3 edge crop.
4:3[SQUEEZE]: The image is displayed in 4:3
squeeze.
Notes
• When a BRBK-SA1 Analog SD Output Card is
installed in the BRC-H900 HD Color Video Camera,
44
GB
SD Menu
Y C b C r
V B S
1 6 : 9 [ L E T T E R ]
O F F
the IMG SIZE settings in the SD menu and VIDEO
OUT menu are linked.
• If you change the IMG SIZE setting in the SD menu,
the IMG SIZE setting for outputs from the VIDEO and
S VIDEO connectors on the BRC-H900 HD Color
Video Camera will also change.
• If you change the IMG SIZE setting in the VIDEO
OUT menu, the IMG SIZE setting for all outputs from
the BRBK-SA1 Analog SD Output Card will also
change.
SETUP
Select whether 7.5IRE setup is added to output signals.
When ON is selected, setup signals are added to all
image signals except YCbCr.
ON: Outputs signals with 7.5IRE setup added.
OFF: Outputs signals with no 7.5IRE setup added.
Note
The SETUP item does not appear when an HD signal of
1080/50i or 720/50p format is output.