Sony BRC-H900 Manual De Instrucciones página 60

9
Connect the cables to the connectors on the rear of
the camera.
Ceiling
Notes
• Take the proper steps and make sure that the
weight of the connected cables does not strain the
connectors.
• For details about the supplied AC power cord and
DC-cord secure connection attachment, see
"Connections" on page 64.
10
The SONY and/or HD nameplates can be turned
upside down, if necessary.
To remove the camera
1
Remove the three screws used to attach the camera
in step 8 of "Installation on a ceiling (example)."
2
Turn the camera with the bracket counterclockwise
to remove.
60
GB
Installation
Installation on a shelf, etc., in a high
position (example)
1
Remove the four screws on the bottom of the
camera to remove the four feet.
2
Attach the ceiling bracket (A) to the bottom of the
camera using the supplied four screws (3M3 × 8).
Position the a hole for screwing on the ceiling
bracket (A) to the front of the camera as illustrated,
align the screw holes on the ceiling bracket with
those on the bottom of the camera, then attach the
bracket to the camera.
3M3 × 8 (supplied)
a hole
Front of
camera
Ceiling
bracket (A)