Breville the Barista Express Impress Manual De Instrucciones página 14

THE GRIND
Setting the Grind Size
TURN
FINER
GRIND SIZE
The grind size will affect the rate of water flow
through the coffee in the filter basket and the
flavor of the espresso. When setting the
grind size, it should be fine but not too fine
and powdery.
There are 25 settings on the GRIND SIZE
dial. To adjust the grind, rotate the dial to the
back of the machine to go finer, or rotate the
dial towards the front of the machine to go
coarser. The smaller the number, the finer the
grind size. The larger the number, the coarser
the grind size. We recommend you start at the
No.16 setting and adjust as required.
NOTE
• When making changes to the grind size, the
new auto dosing time will be calculated after
your next tamp and updated for the dose
cycle following that.
• For most bean varieties, the grinder will
automatically switch off when the beans
get too low to complete a dose.
TIP
Changing the grind size affects the dose in the
portafilter. A finer grind size may cause an under
dose requiring ' A Bit More'. A coarser grind size
may cause an over dose. To avoid an over dose,
press and hold the 'Filter' button for 3 seconds,
reducing the grind time by 3 seconds.
14
TURN
COARSER
GRIND SIZE
DOSING
• Ensure the bean hopper is locked on the
machine and filled with fresh coffee beans.
• Insert the filter basket required, into the
portafilter.
• Press 'Filter' size button to select your filter
size (single or double).
FILTER
• Insert the portafilter securely into the
dosing cradle.
• Press 'Dose' button to start grinding. The
light blinks until grind cycle is completed.
NOTE
If the 'Dose' button is not illuminated, check
that the portafilter is inserted securely in the
cradle, the bean hopper is locked in position
and the tamp lever is in the up-home position.
OR
FILTER
DOSE