Eurocave Compact 59 Serie Modo De Empleo página 16

4/ INSTALLING YOUR WINE CABINET
1II. Alternative hanging of a door (glass door and full glass door only)
x3 x3 x3 x4
A B C D E
You can change which way it opens. Proceed as follows (example for
changing a right hand door to a left hand door):
1
2
3
4
1
Loosen the three screws using the Torx "T25" tool.
2
Remove the upper hinge.
3
Remove the grommets gently using a fine blade.
4
Lift the door from the lower hinge by opening the door slightly and
then lifting it.
6
5
Loosen the door pivot guide.
6
Remove the grommets gently using a fine blade and in its place fit the
pin. Relocate the grommet on the opposite side.
8
7
7
Loosen the four screws.
8
12
Locate the foot on the other side of the housing using the screws.
GB
A
Upper hinge
B
Grommets
C
Grommets
F G H J
D
Torx screw
E
Screw
F
Closing clip
9
Turn the door 180°.
Warning: the glazed doors are very heavy. Take all necessary
precautions not to injure yourself or drop the door.
10
Replace the door on its pivot guide.
5
13
11
11
Relocate the upper hinge.
12
Relocate the hinge in such a way so that the door is parallel with the
case. Check (by closing the door) that the seal adheres well to the
housing and is leak proof.
13
Replace the grommets.
Alternative hanging of a door (Full glass door only on models S-259V3, V-259V3)
G
Lower hinge
H
Door pivot guide
J
Door axis plug
14
9
14
As the door has turned 180 degrees, reposition your handle above
the lock (Full Glass and Black Piano doors only): Unscrew the six
screws placed on the side of the door, using the Allen wrench (2,5
mm), which you will find in the handle's box.
Your wine cabinet EuroCave has been designed to evolve. Depending on the model, it can be adapted to your requirements and be modified in
terms of storage.
Various storage methods
The layout of your wine cabinet can be modified according to your requirements.
Refer to pages 72 to 74 to look at arrangement examples.
How to use the storage shelf (Ref.AXLNH)
12
We strongly recommend that you do not leave your wine bottles:
- Wrapped in tissue paper inside your EuroCave wine cabinet. Tissue paper does not tolerate ambient humidity in the long-term. The saturated
paper will stick to your bottle labels and damage them.
- Stored in cardboard packaging or a wooden case in your EuroCave wine cabinet, in order to encourage maximum air flow around the bottles
and prevent the packaging from deteriorating, which could eventually contaminate your wine bottles.
Poignée
4/ INSTALLING YOUR WINE CABINET
15
Lock
Handle
Front
15
Position the handle on the specially designed groove on the door
frame. Insert the handle all the way into the groove using a forward
movement.
16
Screw the six screws back on. Take care not to catch the seal when
screwing.
5/ LAYOUT – STORAGE
Universal storage Universal sliding
shelf shelf, fitted with the
Ref.: AXLNH "Main du sommelier"
Ref.: ACMSC
Capacity: 50 bottles Capacity: 8 bottles
Max. weight: 85 kg
To store bottles of Bordeaux:
Turn each metal rod so that it is in contact with
the wall of the cabinet. Storage for 4 rows at the
front and 5 rows at the back, or 50 bottles*.
* Each shelf is fitted with a label holder.
Côté face
Cadre de porte
avant
View from above
Seal
Door frame
16
Optional articulated
presentation for
ACMSC shelves
Ref.: AOPRES
Capacity: 9 bottles
with 5 inclined
To store bottles of Burgundy:
Remove themetal rods.
Storage on 7 levels, 8 bottles on each level, or
56 bottles*
13
GB