Motorola APX NEXT Guia Del Usuario página 30

MN005642A01-AR
Chapter 4 : Getting Started
4.4
Attaching and Removing the Accessory Connector Cover
To prevent damage to the accessory connector, shield it with the connector cover when not in use.
Attaching the Accessory Connector Cover
Procedure:
To attach the Accessory Connector Cover, perform the following actions:
a Insert the hooked end of the cover into the slot above the connector.
b Press the top of the cover down to seat it in the slot.
c Rotate the thumbscrew clockwise to tighten the cover.
Removing the Accessory Connector Cover
Procedure:
To remove the Accessory Connector Cover, perform the following actions:
a Rotate the thumbscrew counterclockwise until it disengages from the radio.
b Rotate outwards and lift the connector cover to disengage it from the radio.
30