Motorola APX NEXT Guia Del Usuario página 40

MN005642A01-AR
Chapter 5 : Home Screen
5.1.4.2
Logging In to CommandCentral (Subsequent Login)
NOTE: If the user or radio is not provisioned to use SmartMessaging, the widget shows relevant
user feedback.
Procedure:
1 From the Home screen, tap
2 Tap CommandCentral Login, then enter your username or email address followed by your
password.
3 Tap Sign On, then enter the verification code generated by your device (if 2-factor
authentication is enabled).
NOTE:
You can request to resend the code to the connected device.
The code is 8 characters and can be alphanumeric.
4 Tap to complete the log in.
5.2
Status Indicators
This section explains the status indicators of the radio.
5.2.1
Battery Charge Status
Your radio indicates the battery charge status through LED, sounds, and the battery icon on the
display. You can also check the battery charge status by using the menu entry.
Battery Protection is activated when the battery is low or operating in extremely low temperatures to
extend radio communication. Features such as Wi-Fi and LTE are temporarily suspended.
When the Battery Protection Mode is active, you receive a notification. You can dismiss the Battery
Protect Mode notification by tapping Close on the dialog box. The top display will switch between
zones/channel information and Battery Protect Mode string.
Battery Protection Mode will end when the battery level or the temperature has returned to normal. A
notification will appear on the front display indicating that LTE and Wi-Fi services have been restored.
You can press Close to dismiss the notification or the dialog box will close itself after 3 minutes. The
top display notification will also disappear.
5.2.2
Radio Icons
These icons appear at the status bar to provide device-specific information or status.
Icon
(Front display)
(Top display)
40
Shift Manager Launcher.
Name
Battery
Description
Indicates the remaining battery level of the ra-
dio. The icon blinks when the battery level
drops to 10% or lower.