Publicidad
Idiomas disponibles
Idiomas disponibles
MN005642A01-AR
Chapter 7 : General Radio Operation
Chapter 7
General Radio Operation
This chapter explains the general operations of your radio.
7.1
Scan Lists
Scan lists are created and assigned to individual channels/groups. Your radio scans for voice activity
by cycling through the channel/group. The sequence of scan is as specified in the scan list for the
current channel/group.
Your radio supports different types of Scan Lists:
•
Conventional Scan List
•
Multi-System Talkgroup Scan
•
Trunking Priority Monitor Scan List
•
Voting Scan List
A maximum of 200 Scan Lists can be programmed in your radio. These lists must be programmed by a
qualified radio technician.
7.1.1
Managing the Scan List
Procedure:
1 From the Home screen, tap
2 Tap Scan List or Channels.
3 Tap the required channel and perform one of the following options:
•
To assign Priority-One status to the channel, select Priority 1.
•
To assign Priority-Two status to the channel, select Priority 2.
•
To remove priority from this channel, select No Priority.
•
To remove the channel from the scan list, select Remove from Scan.
•
To add the channel to the scan list, from the Channels tab, select Add to Scan List.
7.2
Scan
This feature allows you to monitor traffic on different channels by scanning a programmed list of
channels. Scanning is halted if you initiate a call and resumes when the call has ended.
7.2.1
Toggling the Scan Feature On and Off
Procedure:
Perform one of the following actions:
46
Scan List.
Publicidad
