Publicidad
Idiomas disponibles
Idiomas disponibles
Your radio displays Out of Range when both LMR and SmartConnect are unavailable.
NOTE:
The SmartConnect feature must be programmed by a qualified radio technician. For more
information, contact your system administrator.
The Searching Site display is only visible on the radio when you enable this feature through the
Customer Programming Software (CPS).
18.3
Wi-Fi
You can connect your radio to a Wi-Fi network for wireless programming and SmartConnect features.
Your service administrator preprograms the Wi-Fi Service Set Identifier (SSID) or network name that
your radio can connect to. This feature is enabled by default on your radio.
NOTE: Channel 12 and 13 are enabled for Wi-Fi for all countries except US and Canada.
18.4
Mission Critical Wireless Bluetooth
Technology
This feature allows your radio to extend its functionality by connecting to external proprietary Motorola
SolutionsBluetooth accessories. Use Motorola Solutions proprietary Mission Critical Wireless (MCW)
devices with APX radios during Mission Critical operations. Other Bluetooth devices may or may not
meet the mission critical standard.
By default, Bluetooth wireless technology is activated on your radio. Your radio supports the following
Bluetooth enabled devices or profiles:
•
Headset (HSP)
•
Dial Up Networking (DUN)
•
Personal Area Networking (PAN)
•
Serial Port (SPP)
•
Generic Access Profile (GAP)
•
General Attribute Profile (GATT)
In a multi-control head to one transceiver configuration, one control head must be assigned to
Bluetooth for speaker and microphone interactions.
NOTE: APX 7000L radio does not support Bluetooth Commercial of the Shelf (COTS) devices
or the Personal Area Network (PAN) data profile.
APX 7000L only works with Motorola Solutions MCW devices.
18.4.1
Toggling Bluetooth On and Off
Procedure:
1 From the Home screen, tap
2 Tap
Bluetooth.
3 To toggle Bluetooth on and off, tap Bluetooth.
Bluetooth
®
More.
MN005642A01-AR
Chapter 18 : Connectivity
Wireless
®
75
Publicidad
