Publicidad
Idiomas disponibles
Idiomas disponibles
Option
7.2.2
Making a Dynamic Priority Change (Conventional Scan Only)
While the radio is scanning, the dynamic priority change feature allows you to temporarily change any
channel in a scan list (except for the Priority-One channel) to the Priority-Two channel. This change
remains in effect until scan is turned off. Scan then reverts to the default setting.
Procedure:
From the Home screen, tap
7.2.3
Deleting Nuisance Channels
If a channel continually generates unwanted calls or noise (termed "nuisance" channel), you can
temporarily remove the unwanted channel from the scan list. This capability does not apply to priority
channels or the designated transmit channel.
Procedure:
From the Home screen, tap
7.2.4
Restoring a Nuisance Channel
Procedure:
To restore the deleted nuisance channel, perform one of the following actions:
•
Stop and restart a scan.
•
Mode change to another channel and back to the original channel.
•
Turn off the radio and then turn it on again.
7.3
Selecting Zones
Procedure:
1 Use one of the following methods to select a zone.
Actions
To turn on Scan, turn the preprogrammed 2–Position Con-
centric switch to the scan position.
a From the Home screen, tap
b To toggle the scan feature on and off, tap
.
Nuis Del.
MN005642A01-AR
Chapter 7 : General Radio Operation
Radio Quick Settings.
Scan.
47
Publicidad
