Nilfisk Liberty SC60 Instrucciones De Uso página 26

A - ENGLISH
STOPPING THE MACHINE
1 Stop the machine by releasing the Drive Pedal (3) in
manual mode.
2 In Autonomous Mode the machine can be stopped by
pressing the Start/Pause Button (33) on the rear of the
machine.
3 ONLY IN THE EVENT OF AN EMERGENCY!
To stop all machine functions immediately, press one of
the two Emergency Stop (7, E).
• The display will state "Emergency Stop Button
Pressed".
• Follow the directions on the screen.
• To reset the machine functions, rotate the emergency
stop clockwise.
• Press "Confirm" to resume the previous action.
• Emergency Stop can be activated in either Autonomous
or Manual Modes but should only be used in the case of
an emergency.
A - 26
INSTRUCTIONS FOR USE
Nilfisk Liberty SC60 - 56091234
E
7
33
11/2020