Publicidad
Idiomas disponibles
Idiomas disponibles
PARTS AND SERVICE
Repairs, when required, should be performed by Nilfisk, Inc., who employs factory trained service personnel, and maintains an inventory of Nilfisk
original replacement parts and accessories.
Call NILFISK, INC. for repair parts or service. Please specify the Model and Serial Number when discussing your machine.
MODIFICATIONS
Modifications and additions to the cleaning machine which affect capacity and safe operation shall not be performed by the customer or user
without prior written approval from Nilfisk, Inc. Unapproved modifications will void the machine warranty and make the customer liable for any
resulting accidents.
NAME PLATE
The Model Number (also known as Part Number) and Serial Number of your machine are shown on the Nameplate, located on the bottom side of
the seat panel.
Date of Manufacture "Date Code" is marked on the nameplate. Date Code: A20, means January 2020.
This information is needed when ordering repair parts for the machine. Use the space below to note the Model Number and Serial Number of your
machine for future reference.
MODEL NO. ___________________________________________________________
SERIAL NO. ___________________________________________________________
UNCRATE THE MACHINE
When the machine is delivered, carefully inspect the shipping packaging and the machine for damage. If damage is evident, save the shipping
carton (if applicable) so that it can be inspected. Contact the Nilfisk Customer Service Department immediately to file a freight damage claim.
Refer to the unpacking instruction sheet included with the machine to remove the machine from the pallet.
WARNING!
The Products sold with this Manual contain or may contain chemicals that are known to certain governments (such as the State of California, as
identified in its Proposition 65 Regulatory Warning Law) to cause cancer, birth defects or other reproductive harm. In certain locations (including
the State of California) purchasers of these Products that place them in service at an employment job site or a publicly accessible space are
required by regulation to make certain notices, warnings or disclosures regarding the chemicals that are or may be contained in the Products at
or about such work sites. It is the purchaser's responsibility to know the content of, and to comply with, any laws and regulations relating to the
use of these Products in such environments. The Manufacturer disclaims any responsibility to advise purchasers of any specific requirements that
may be applicable to the use of the Products in such environments.
TRANSPORTING THE MACHINE
CAUTION!
Before transporting the machine in a closed truck or trailer, make sure that . . .
•
All tanks are empty.
•
If a ramp is required to load/unload the machine, remove Front Guard Assembly (46) prior to driving the machine up or down a ramp.
•
Recovery tank cover secured in closed position.
•
Scrub deck and squeegee are in the down position.
•
The machine is tied down securely - see Tie Down Locations (6) in Know Your Machine. Only use locations designated as "Tie Down
Locations" to secure the machine during transport. Using any other location of the machine to tie down the machine may cause damage or
injury.
•
The machine's electromagnetic brake is engaged (not manually overridden), see Electromagnetic Brake section if necessary.
11/2020
INSTRUCTIONS FOR USE
56091234 - Nilfisk Liberty SC60
ENGLISH - A
A - 3
Publicidad
