Warning notices
inside the device
Danger of electric shock
This may result in serious injuries or death.
▶
▶
▶
18
Dispose of old devices in accordance with safety rules and not in nor-
mal domestic waste.
Keep potential sources of ignition such as fire, sparks, and open flames
away from the battery.
Danger of explosion! Oxyhydrogen forms in the battery during char-
ging.
Battery acid is corrosive and must never come into contact with your
eyes, skin, or clothing.
Ensure there is a sufficient supply of fresh air during charging.
Use functions only after reading the Operating Instructions in full.
WARNING!
The housing may only be opened by service technicians trained by the manu-
facturer.
Before working with the housing open, the device must be disconnected from
the grid. A suitable measuring device must be used to ensure that electric-
ally charged parts (e.g. capacitors) are completely discharged.
With the aid of a clearly legible, understandable warning sign, ensure that
the device remains disconnected from the grid until all work has been com-
pleted.
Warning
High leakage current!
Earth connection essential before connecting supply.
Always stop charging before you disconnect the charging cable!
Explosive gases. Prevent flames and sparks.
Provide adequate ventilation during charge!
Avertissement
Fuite élevée de courant!
Raccordement á la terre indispensable avant le raccordement au réseau.
Toujours arrêter la charge avant de déconnecter le câble de charge!
Gaz explosifs. Éviter les flames et les étincelles.
Prévoir une ventilation adaptée pendant la charge!
Protective class I
Selectiva 4.0 xxxx xkW UL
Ser. No.:
xxxxxxxx
Part No.:
IP21
Platform x1
Production Date Code
U
120VAC
240VAC
AC nom.
I
xxA
AC max.
1~ NPE
P
xxxxW
xxxxW
60Hz
AC max.
DANGER
Risk of electric shock. Do not touch uninsulated portion
of output connector or uninsulated battery terminal.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
xxxxxxxx
www.fronius.com
xxxxxxxx
xxxx
U
xxV
DC nom.
xxA
I
xxA
DC max.
P
xxW
DC nom.
CAN ICES-001 (B) / NMB-001 (B)
Fronius International GmbH
Froniusstraße 1
A-4643 Pettenbach
Austria