Getting Started - Klarstein TOMAHAWK Manual De Instrucciones

EN
28

GETTING STARTED

Preparation
Note: To use the barbecue, you need a liquid gas bottle and suitable gas pressure
regulators. The gas pressure regulators should comply with the current version of the
EN12864 standard and national specifications.
Setting Up
• After purchasing the gas bottle, you can install it in your barbecue.
• Make sure that the barbecue is complete and that no appliance parts are missing. If
any parts are missing, contact the customer service.
• You will need a suitable screwdriver and spanner to assemble the appliance.
• Select a suitable place to place the unit.
• The appliance should be placed securely on a flat surface of sufficient size.
• Make sure that the input and output regulators are appropriate and suitable for the
gas cylinder valve and the appliance.
• If the gas pressure regulator is to be used outdoors, make sure that it is protected
from the environment.
• You will need a suitable spanner to connect the gas bottle.
• When connecting the flexible hose, make sure that it is not twisted.
Connecting a Gas Cylinder
• When changing the gas bottle, make sure that there are no sources of ignition in the
vicinity.
• Place the gas bottle on the left-hand side of the barbecue and never inside the
barbecue, as the gas bottle must be in a safe position, away from any sources of
heat.
• When you are ready to use the barbecue, attach the gas pressure regulator to the
gas bottle and tighten it.