Publicidad
Idiomas disponibles
Idiomas disponibles
20
10.2 Annual maintenance
We recommend that you have your product serviced completely by an authorised service centre at
least once a year. This ensures that it works properly without future problems.
The annual service should include the following checks:
•
Wheels and tyres
•
Battery, cable and connections
•
The controller's programming in relation to the user's requirements
•
Frame, bracket and fasteners (nuts and bolts)
10.3 Wheel maintenance
Replacing the TIBODA tyre is a seemingly simple operation that does not require any special skills,
however, given the importance of the part in question it is always advisable to contact your trusted
dealer.
WARNING!
Always use original parts TIBODA, MORETTI S.p.A. is not responsible for incorrect
assembly or assembly with unauthorized components including bolts..
A torque wrench is required for correct mounting of the wheel so that the correct tightening of the
bolt can be adjusted. Avoid tightening without proper measurement.
750 & 1000 W MOTORIZATION - Exact sequence of spacers and screws
Right view
Left view
The cable coming out of the engine
must be placed in the slot created
specifically on the fork.
Publicidad
