Ardea mobility Tiboda TB030X Manual De Instrucciones página 68

24
12.1 TBA102 Digital display - TIBODA
TIBODA can be equipped with an LCD display which provides the following information:
• speed
• total distance (km)
• battery charge
• motor power (current)
• error codes
All display functions can be controlled with the keypad next to the handlebar. The accessory can be
retrofit to the drive, to do so proceed as indicated below.
1
3
The accessory can be retrofit to the drive, to do so proceed as indicated below.
12.1.1 Installation
Fig.17 - A
2
Display control buttons
1 UP
2 MODE
3 DOWN
Fig.15
Fig.16
Fig.17 - B
1. Install the display mount and control buttons
as shown. (Fig.16)
2. Open the cable compartment by undoing the
3 screws and route the display cable through
the hole at the top of the compartment.
(Fig.17)
3. Connect the 5 pin socket in the TIBODA
cable compartment (Fig.16). Close the
compartment. (Fig.18)
Fig.17 - C
Fig.18