Ardea mobility Tiboda TB030X Manual De Instrucciones página 79

Table 4
Recommended separation distances between portable and mobile
The TIBODA device is intended to operate in an electromagnetic environment in which
RF disturbances are under control. The client or user of TIBODA can contribute to
preventing EM interference by ensuring a minimum distance between the mobile
and portable RF communications devices (transmitters) and the TIBODA battery
charger during charging and the internal TIBODA device during its operation as
indicated below, in relation to the maximum output power of the transmitters
Tests
During
battery
Maximum
charging
rated output
power of
from 150
transmitter
kHz to
W
80 MHz
d = 1,2√P
0.01 0.12
0.1 0.38
1 1.2
10 3.8
100 12
For transmitters whose maximum rated output power is not listed above, the
recommended separation distance d, in metres (m), can be calculated using the equation
applicable to the transmitter frequency, where P is the maximum rated output power
of the transmitter, in Watt (W), as given by the transmitter's manufacturer.
NOTE 1: At 80 MHz and 800 MHz, apply the separation distance for the higher frequency band.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation
is affected by absorption and reflection from structures, objects and people.
17. TECHNICAL SPECIFICATIONS
17.1 Dimensions
TB030X – TB040X – TB075X – TB100X TIBODA front drive for wheelchairs
7 6
8 7
F
E
D
688
C
781
B
radio communications equipment and TIBODA
Separation distance as a function of the frequency of the transmitter
During During
the use of battery
TIBODA charging
from 150 from 80
kHz to kHz to
80 MHz 800 MHz
d = 1,2√P d = 1,2√P
0.12
0.38
1.2
3.8
12
5 4
6
688
13,2 Kg
781
296,04
296,04
SE NON SPECIFICATO:
QUOTE IN MILLIMETRI
FINITURA SUPERFICIE:
TOLLERANZE:
LINEARE:
ANGOLARE:
m
During
the use of
TIBODA
from 80
kHz to
800 MHz
d = 1,2√P
0.12 0.12
0.38 0.38
1.2 1.2
3.8 3.8
12 12
3 2
5 4
424
80
312
376
410
FINITURA: INTERRUZIONE
SE NON SPECIFICATO: FINITURA:
BORDI NETTI
QUOTE IN MILLIMETRI
FINITURA SUPERFICIE:
TOLLERANZE:
LINEARE:
ANGOLARE:
During During
battery the use of
charging TIBODA
from 800 from 800
kHz to kHz to
2.5 GHz 2.5 GHz
d = 1,2√P d = 1,2√P
0.23 0.23
0.73 0.73
2.3 2.3
7.3 7.3
23 23
1
3 2
424
F
80
E
D
312
C
376
410
B
INTERRUZIONE
NON SCALARE DISEGNO REVISIONE
NON SCALARE DISEGNO
BORDI NETTI
35
1
F
E
D
C
B
REVISIONE