cecotec conga 8090 ULTRA Manual De Instrucciones página 47

Side brush.Fig. 26.
Remove and clean the side brushes regularly.
Recommendation
In order to ensure a perfect cleaning, it is suggested to replace the side brushes every 3
months, depending on the frequency and type of use.
Free-fall sensors. Fig. 27.
Clean the free-fall sensors with a soft cloth regularly.
Warning
Always transport the product turned off and in its original package.
It is recommended a weekly robot clean-up, depending on its use.
7. BATTERY REPLACEMENT AND CHARGING
- Do not use any other battery, power adapter or charging base than the one officially
provided by Cecotec.
- Do not use non-rechargeable batteries.
- Do not remove, dismantle or attempt to repair the battery or the charging base.
- Do not place the charging base near heat sources.
- Do not use a wet cloth to wipe any of the parts of this product.
- If the robot is not going to be used for a long time, remove the battery from the product and
store it in a dry and safe place. It is suggested to charge the battery every month in order
to avoid damage to the battery.
- Do not dispose of waste batteries at will. It is suggested to hand them over to professional
organizations for correct treatment.
8. TROUBLESHOOTING
Problem
1. The robot does not start up or does not clean.
2. The robot cannot charge or return to the charging base.
3. The robot does not work properly.
4. The robot emits a strange noise during cleaning.
5. The robot does not clean efficiently or dust leaks from the robot.
6. The robot could not connect to Wi-Fi.
7. The robot did not carry out the scheduled cleaning task.
ENGLISH
47