Freestyle Libre 2 Manual Del Usuario página 120

ART46983-001_rev-A 24-Aug-2022 2:30pm
What it may mean: The Sensor life has ended.
What to do: Apply and start a new Sensor.
Display: Signal Loss Alarm
What it may mean: Sensor has not automatically communicated with your device
in the last 20 minutes.
What to do: Make sure your device is within 20 feet of the Sensor. Try scanning
the Sensor to get a glucose reading. If the Signal Loss Alarm shows again after
scanning your Sensor, contact Customer Service.
Display: New Sensor Found
What it may mean: You scanned a new Sensor before your previous Sensor
ended.
What to do: Your device can only be used with one Sensor at a time. If you start a
new Sensor, you will no longer be able to scan your old Sensor. If you would like
to begin using the new Sensor, select "Yes" and scan again.
Display: Scan Error
What it may mean: Your device was unable to communicate with the Sensor.
OR
If you are using Android Phone, another NFC app is competing for your phone's
NFC.
What to do: Try scanning the Sensor again. Make sure to follow the directions in
Starting Your Sensor or Checking Your Glucose. If using Android Phone, try
opening the App to scan your Sensor because another app that uses NFC was
detected.
Note: If using the Reader, you may need to move away from potential sources of
electromagnetic interference.
Display: Sensor Error