Freestyle Libre 2 Manual Del Usuario página 26

Note: If you need help applying your Sensor, tap HOW TO APPLY A SENSOR
or go to Applying Your
Applying Your Sensor
CAUTION:
The Sensor Pack and Sensor Applicator are packaged together as a set and
have the same Sensor code. Check that the Sensor codes match before using
your Sensor Pack and Sensor Applicator. Do not use Sensor Packs and Sensor
Applicators with di!erent Sensor codes together as this will result in incorrect
glucose readings.
Intense exercise may cause your Sensor to loosen due to sweat or movement
of the Sensor. If the Sensor is becoming loose or if the Sensor tip is coming
out of your skin, you may get no readings or unreliable low readings. Remove
and replace your Sensor if it starts to loosen and follow the instructions to
select an appropriate application site. Do not attempt to reinsert the Sensor.
Contact Customer Service if your Sensor becomes loose or falls o! before the
end of the wear period. Customer Service is available at 1-855-632-8658 7
Days a Week from 8AM to 8PM Eastern Time; excluding holidays.
1. Apply Sensors only on the back of your upper arm. If placed in other areas,
the Sensor may not function properly and could give inaccurate readings.
Avoid areas with scars, moles, stretch marks or lumps. Select an area of skin
that generally stays flat during your normal daily activities (no bending or
folding). Choose a site that is at least 1 inch (2.5 cm) away from an insulin
injection site. To prevent discomfort or skin irritation, you should select a
di!erent site other than the one most recently used.
Sensor.
ART46983-001_rev-A 24-Aug-2022 2:30pm