Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Creating your own environment
As a first step, set the night mode and customise your environment.
8. Set the time range that will
coincide with night mode
(silent), selecting a start
and end time, then click
"Proceed".
Customising your device
Connect the recovery unit to the home network.
11. Assign a name to the
heat recovery unit and
click
on
"Proceed".
Example: Hru.
44
9. Create your own virtual
room corresponding to
the
room
where
recovery unit is installed
and click on "Create
New". Then
click
"Proceed".
12. Connect the recovery unit to
the network and click "Select
HRU network".
Note: Move closer to the Wi-
Fi module and press and
hold the pairing button (B)
until the LED (A) flashes
blue.
10. Choose the type of room
between
the
Comfort (recommended for
the sleeping area), enter the
corresponding name and
on
click on "Proceed".
Standard
and
PAIRING
A
B
Publicidad
