Vortice VORT HRI 200 FLAT IoT Manual De Instrucciones página 53

ENGLISH
Some examples of the HOME screen are shown below.
Bypass
1
Ext -3°C Int 22°C
Sup 18°C
Ext 5°C
Equipment start-up/shut-down
If the equipment is switched off (only via WiFi), the "HOME" page will display "OFF" at the centre.
To switch on equipment: press the [▲] key from the "HOME" page.
Operating mode selection
To change the operating mode: press the [▲] key from the "HOME" page until one of the following texts below appears:
"1", "2", "3", or "Boost". Each text displayed corresponds to a different fan speed and thus a different flow rate.
"Main menu" page
Press the [], , button from the "HOME" page to go to the "Main Menu" page.
From this new screen you can manage:
• Operations menu (allows some devices or some functions to be activated).
• Alarms (enables verification and management of any alarms).
• Configuration (enables date and time configuration).
• Info (enables viewing of software versions).
Use the [▲] and [▼] keys to move from one line to another. The selected line is highlighted in black.
Use the [] key to go to the highlighted page.
Use the [X]: key: To exit from a page without saving.
MAIN MENU
USE MENU
ALARM
SETUP
INFO
Warning:
!
After 2 minutes and no keys being pressed, the display returns to the "Home" page without saving any
changes.
NoFrost
2
27/03/2022 12:30
USE MENU
ALARM
SETUP
INFO
Alarm!
27/03/2022 12:30
MAIN MENU
53