Teka JZC Serie Manual De Usuario página 43

The appliance does not work:
Ensure that the power cable is
plugged in.
The induction zones do not produce
heat:
The container is not appropriate (it does
not have a ferromagnetic bottom or is
too small). Check that the bottom of the
container attracts a magnet, or use a
larger container.
A humming is heard when starting to
cook in the induction zones:
With containers which are not very thick
or not of one piece, the humming results
from the transmission of energy directly
to the bottom of the container. The
humming is not a defect, but if you wish
to avoid it anyway, reduce the power
level slightly or use a container with a
thicker bottom, and/or of one piece.
The touch control does not light up
or, despite lighting, does not respond:
No heating zone has been selected. Be
sure to select a heating zone befo-re
operating it.
There is humidity on the sensors,
and/or your fingers are wet. Keep
the touch control surface and/
or your fingers clean and dry.
POWER RATINGS OF THE ELECTRICAL COMPONENTS
DENOMINATIONS
Element heating induction
Element heating induction
EC : energetic consumption calculated per kg in accordance with Regulation (EU) 66/2014.
*
electric cooking
The locking function is activated. Unlock
the controls.
The sound of a fan is heard
while cooking, which continues
even after cooking has ended:
The induction zones have a fan to keep
the electronics cool. This only operates
when the electronic circuits get hot.
It stops again when the circuits cool
whether the hob is turned on or not.
The symbol will appear
power indicator of a hotplate:
The induction system does not fi nd a
pot or pan on a hotplate or it is of an
unsuited type.
The hotplate will switch off and the
message C81 or C82 will appear on
the indicators:
Excessive temperature in the electro-
nics or on the glass. Wait for a while for
the electronics to cool down or remove
the pot or pan so that the glass can cool.
C85 appears on the indicator of one
of the hotplates:
The pot or pan used is of an unsuited
type. Switch off the hob, switch it on
again and try with another pot or pan.
The appliance switches off and the
Ø (cm) Ø pot
recommended
(minimum in cm.)
15,0 10
21,5 13
message C90 appears on the power
indicators (3):
The touch control detects on/off (1)
sensor is covered and doesn't allow
switching on the cooktop. Remove the
possible objects or liquids keeping the
touch control surface, clean and dry until
the message disappears.
The appliance switches off and the
message C91 appears on the power
on the indicators (3):
The touch control detects Stop&Go
sensor (6) is covered and doesn't allow
to handle the cooktop. Remove the
possible objects or liquids keeping the
touch control surface, clean and dry,
then press twice Stop&Go (6) sensor
for removing the message and return
to normal operation.
POWER *EC
(W)
1200/1600
2100/3000
EN
electric cooking
Wh/kg
182,1
178,7
43