Dreame Bot L10 Ultra Manual Del Usuario página 11

Routine Maintenance
EN
Parts
To keep the robot in good condition, it is recommended to refer to the following table for routine maintenance.
Replacement
Part Maintenance Frequency
Period
Used water tank After each use
/
Clean water tank
Main Brush Every 6 to 12 months
Once every 2 weeks
Dust bin filter
Every 3 to 6 months
Side brush
Washboard
Base station's
signaling area
Base station's
charging contacts
Base station's auto-
Once every month /
empty vent
Universal wheel
Edge sensor
Laser Distance
Sensor (LDS)
16
Maintenance Replacement
Part
Frequency Period
Cliff Sensors
Charging Contacts on Robot
Bumper
Once every month
Robot's auto-empty vent
/
Robot's automatic water
refilling inlet
Bottom of the robot
Dust bin Clean it as needed
Dust collection bag 6-8 weeks
/
Every 1 to 3
Mop pad
months
Note: The replacement frequency will depend on your usage of the robot. If an
exception occurs due to special circumstances, the parts should be replaced.
Routine Maintenance
Dust Collection Bag
When the dust collection bag needs to be replaced, a notification will appear
in the app.
1. Discard the dust collection bag.
Note: Pulling upwards on the handle will seal the bag to prevent the dust and
debris from accidentally falling out.
2. Remove the dust and debris from the filter with a dry cloth.
3. Install a new dust collection bag.
4. Close the cover of the dust cabinet.
EN
17