Dreame Bot L10 Ultra Manual Del Usuario página 15

FAQ
EN
Problem Solution
The robot will not Make sure that the robot is not set to the Do Not Disturb (DND) mode, which will prevent it from resuming cleaning.
resume cleaning after The robot will not resume cleaning after you manually return the robot to the base station to charge, which includes
charging. manually placing the robot on the base station or sending the robot to charge via the app or the robot itself.
The station cannot Check whether the dust collection bag in the dust cabinet is full.
automatically empty If the dust collection bag is not full, check whether there is any obstruction at the auto-empty vents of the robot, the base
the dust bin. station, or the dust bin. If any, clean the blocked part in time.
Check whether the seal on the used water tank is loose or not correctly installed, and manually reset it if so.
The water level in Gently press down on the used water tank to make sure it is installed correctly.
the washboard is Remove the washboard and check whether the sewage drain is blocked and clean it.
abnormal. Check the cleaner. Do not add any liquid other than the officially-approved cleaner.
If the problem persists, please contact the after-sales service team.
For additional services, please contact us via aftersales@dreame.tech
Website: https://global.dreametech.com
24
Specifications
Robot
Model RLS6LADC-6
Charging Time Approx. 6.5 hours
Rated Voltage 14.4 V
Rated Power 75 W
Operation Frequency 2400-2483.5 MHz
Maximum Output Power <20 dBm
WEEE Information
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed
with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a
designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities.
Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the
installer or local authorities for more information about the location as well as terms and conditions of such collection points.
Base Station
Model RCS9-5
Rated Input 220-240 V 50-60 Hz
Rated Output 20 V 2 A
Power (during dust emptying) 1000 W
Power (during cleaning) 55 W
Power (drying and charging） 78 W
Under normal use of condition, this equipment should be kept a separation
distance of at least 20 cm between the antenna and the body of the user.
EN
25