Dreame Bot L10 Ultra Manual Del Usuario página 12

Idiomas disponibles

Routine Maintenance

Used Water Tank

1. Remove the used water tank, open its cover and pour out the dirty water.

2. Rinse the used water tank with clean water, and use the provided cleaning

brush to clean the inner wall of the used water tank.

Note: The float ball in the used water tank is a movable part. Do not apply too

much force when cleaning it to avoid damaging it.

Main Brush

1. Press the brush guard clips inwards to remove the brush guard and lift the

brush out of the robot.

2. Pull out the brush covers as shown in the diagram. Use the provided

cleaning tool to remove the hair tangled in the brush.

Routine Maintenance

Side Brush

Remove and clean the side brush.

Universal Wheel

Note:

Use a tool such as a small screwdriver to separate the axle and tire of the

universal wheel. Do not use excessive force.

Rinse the universal wheel under the running water and put it back after drying it

completely.

Dust Bin

1. Open the robot cover and press the bin clip to remove the dust bin.

2. Open the bin cover and empty the bin as shown in the diagram.