Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
9 Spare parts
Available spare parts (see Fig.5, 6, 7):
1 Exchange set complete
1.1
Set impeller with
1.11
Nut
1.12
Plain washer
1.13
Impeller
1.14
O-ring
1.2
Set mechanical seal with
1.11
Nut
1.12
Plain washer
1.14
O-ring
1.21 Mechanical seal complete
1.3
Set lantern with
1.11
Nut
1.12
Plain washer
1.14
O-ring
1.31 Vent screw
1.32 Coupling protection cap
1.33 Lantern
1.4
Set shaft with
1.11
Nut
1.12
Plain washer
1.14
O-ring
1.41
shaft
1.42 Snap ring
1.5
Coupling complete
2 Motor
3 Pumphousing complete with
1.14
O-ring
3.1
Pumphousing (IL, DL, BL)
3.2
Plug for gauge tappings
3.3
Check flap ≤ DN 80 (DL-Pumps only)
3.4
Check flap ≥ DN 100 (DL-Pumps only)
4 Fixing-screws lantern / pumphousing
5 Fixing-screws motor/lantern
6 Fixing-nut motor/lantern
7 Plain washer motor/lantern
8 Adapter-ring (BL-pumps only)
9 Pump support feet for motor size ≤ 4kW
(BL-pumps only)
10 Fig. 8: forked spacer (available as single part)
The forked spacer is required for all
ATTENTION!
maintenance and repair work, to fix
the impeller position within the pum-
phousing (Fig. 8, pos. 10).
Only original Wilo spare parts are to
be used to ensure the fault-free ope-
ration of the pump.
When ordering spare parts, please state spare part
nos., -descriptions and all data of pump and motor
name plate also.
20
Technical modifications reserved !
Publicidad
