Hendi 975374 Manual Del Usuario página 7

Main parts of the product
(Fig.1 on page 3)
1. Quick Start button
2. Control panel
3. Power cord connector
4. Vacuum cord connector
5. Lid
6. Handle
7. Quick Seal button
8. Foam gasket strip
9. Vacuum chamber gasket
10. Vacuum chamber plate
11. Sealing bar
Spare parts or accessories
1. Power cord
NOTE! Vacuum bag roll is not included.
Control panel
(Fig.2 on page 3)
A. POWER LED
When the POWER LED is on, the machine is ready to use.
B. ON/OFF button
• When the machine is ready to use, press ON/OFF. The last
sealing time is displayed and the fan starts – the machine
is ready to generate vacuum.
• If the machine is inactive for 10 minutes, the display and
the fan are automatically switched off.
• In order to stop the machine, press ON/OFF. Also when
the sealing cycle is finished, press ON/OFF to switch off
the machine, and disconnect it from the mains.
C. Auto Vacuum button (START)
• In the Default mode press the START button. The machine
automatically starts generating vacuum and sealing. In
the Marinate mode press the START button. The machine
automatically starts marinating.
• In the Pulse Vac mode press the START button. The ma-
chine automatically starts generating vacuum in the pulse
mode.
• For more comfortable access, the Quick Start button is
placed on the handle. (This button has the same function
as the START button on the control panel).
(NOTE! This function can be started if the lid is closed and
slightly pressed).
D. SEAL button
1. Press the SEAL button in order to stop the vacuum gen-
erating cycle and immediately seal the bag in order to
prevent soft foodstuffs from getting crushed.
2. Allows to form bags of any sizes.
For more comfortable access, the SEAL button is placed on
the handle. (This button has the same function as the SEAL
button on the control panel).
(NOTE: This function can be started if the lid is closed and
pressed).
E. Digital display
1. Displays the vacuum cycle, counts down from 9 to 0.
When 0 is reached, the cycle is finished.
2. Displays the sealing time which can be set and adjusted
from 0 to 6. The sealing time save function is also availa-
ble.
3. If the display shows "E", it means that the machine is in
the protection mode.
F. Sealing time adjustment button ( (F1) or (F2) )
Setting the sealing time by means of "Up" and "Down or (F1)
and (F2) buttons. When the value is set to 0, the machine
does not start the sealing cycle.
G. The Marinate mode (only with external vacuum container
The Marinate mode is designed to repeat the vacuum gen-
eration cycle and air release to the bag, which results in
perfect marinating of foodstuffs within the shortest time
possible.
(NOTE! This function can be started if the lid is opened).
H. Accessory
Not available in this model.
I. Pulse Vac button
The Pulse Vac button prevents soft foodstuffs from getting
crushed. As the Pulse Vac button is pressed, the machine
gradually evacuates air.
(NOTE! This function can be started if the lid is closed and
pressed).
J. Impulse Seal button
When the Impulse Seal button is pressed, its LED lights up.
The machine switches over to the Impulse Seal mode. Now
the bag can be sealed by simply opening and closing the
lid. (The mode is applied mainly when it is not necessary to
generate vacuum).
(NOTE! This function can be started if the lid is closed and
pressed).
Preparation before use
• Remove all protective packaging and wrapping.
• Check that the device is in good condition and with all ac-
cessories. In case of incomplete or damaged delivery, please
contact the supplier immediately. In this case, do not use the
device.
• Clean the accessories and the appliance before use (See == >
Cleaning & Maintenance).
• Make sure the appliance is completely dry.
• Place the appliance on a horizontal, stable and heat resistant
surface that is safe against water splashes.
• Keep the packaging if you intend to store your appliance in
the future.
• Keep the user manual for future reference.
NOTE! Due to manufacturing residues, the appliance may emit
a light odor during the first few uses. This is normal and does
not indicate any defect or hazard. Make sure the appliance is
well ventilated.
Operating instructions
Prior to start-up
• Connect the machine to the power supply.
• When the machine is switched on, the POWER LED lights up.
• When ON/OFF is pressed, the display is switched on and the
fan starts. The machine is ready to use.
Vacuum packing and bag sealing
• Select an appropriate bag and place foodstuffs inside.
• Leave at least 4-5 cm of space to ensure better results of the
vacuum generation process.
• Put the open edge of the bag on the chamber gasket. Make
sure that the open edge is inside the vacuum chamber.
• Close and press the lid.
GB
7