Remove the grid, the grid support and the drop
drawer grid.
Clean the components with cold or lukewarm
water, then dry it and refit it correctly.
MAINTENANCE AND CLEANING
DESCALING
Limescale normally builds up with extended use
of the appliance; the machine needs descaling
every 3-4 months and/or whenever a reduction
in water flow is noticed
The machine needs to be descaled when the
light on the descale key comes on (if enabled).
To run the descaling cycle refer to chapter "MA-
CHINE MENU"
BLUETOOTH
The machine is equipped with Bluetooth®v4.0
(Bluetooth®low energy technology compatible)
for maintenance checks by authorised service
centres.
EN
33