FREE DOSE BEVERAGE DELIVERY
Do steps:
,
,
ESPRESSO DELIVERY.
Press the FREE DOSE BEVERAGE
to start delivery.
Once the desired amount of brewed coffee is
reached, press the button again to stop brewing.
For a new supply cycle, wait for supply buttons
and multifunction button turning on with steady
white light.
Once supply is over, lift and then lower the capsule
loading lever to unload the exhausted capsule.
In case of soluble capsules, it is recommended that a
brief plain (i.e. by using only water) supply should be
dispensed before inserting the capsule, so that you
can best enjoy the product.
PREPARING THE COFFEE
and
in paragraph
button
COFFEE DOSE PROGRAMMING
Measures are always programmed using the same
key; any other keys are ignored.
The programmed amount of brewed coffee mini-
mum 0,70 fl oz (20 ml) can be changed by repeat-
ing the programming.
Should a coffee dose lower than 0,70 fl oz (20 ml)
be set, the coffee machine will store in any case the
minimum coffee dose that can be set.
Lift the capsule loading lever until it locks into
position to open the capsule fitting compartment.
Put a Lavazza
fitting compartment.
Lower the capsule loading lever to close the cap-
sule fitting compartment.
Press and hold one of the two coffee delivery
/
for at least 5 seconds.
The selected button will flash and the coffee
machine will enter the programming mode.
Now release the key.
Once the desired coffee amount is reached, stop
the brewing by pressing the button again.
If the programmed measure exceeds the maximum
allowed 8.45 fl oz (240 ml) the machine will auto-
matically stop delivery, the delivery button will blink
and the last programmed measure will be saved in the
memory.
If there is a power failure during programming, the
last programmed value remains in the memory.
If during a dose programming, water lack is indicated,
the machine stops the supply and the dose being pro-
grammed won't be saved. Once filled the water tank,
repeat the dose programming procedure.
EN
capsule into the capsule
31