Descargar Imprimir esta página

Husqvarna Xcite Z350 Manual De Usuario página 13

Publicidad

Idiomas disponibles

Idiomas disponibles

Battery safety
WARNING:
cause an explosion and cause injury.
If the battery has a deformation or
is damaged, speak to an approved
Husqvarna service agent.
WARNING:
instructions that follow before you use
the product.
Use protective glasses when you are near
batteries.
Do not wear watches, jewelry or other metal
objects near the battery.
Keep the battery out of reach for children.
Charge the battery in a space with good airflow.
Keep flammable materials at a minimum
clearance of 1 m when you charge the battery.
Discard replaced batteries. See
page 30 .
Explosive gases can come from the battery. Do
not smoke near the battery. Keep the battery
away from open flames and sparks.
Safety instructions for maintenance
WARNING:
instructions that follow before you use
the product.
WARNING:
and can cause injury or damage to
property or the adjacent area. Do not do
maintenance on the engine or the cutting
deck without these conditions:
The engine is off.
The product is parked on a level
surface.
The parking brake is applied.
The ignition key in stop position and
removed.
The blades are disengaged.
All moving parts have stopped.
The ignition cables are removed from
the spark plugs.
WARNING:
pressure may have sufficient force to
1922 - 006 - 13.12.2022
A damaged battery can
Read the warning
Disposal on
Read the warning
The product is heavy
Fluid escaping under
penetrate skin and cause serious injury.
If fluid is injected into the skin, seek
immediate medical attention. Keep body
and hands away from pin holes or
nozzles that eject fluid under high
pressure. If a leak occurs, have the
product immediately serviced by a
trained technician.
WARNING:
from the engine contain carbon
monoxide, an odorless, poisonous and
very dangerous gas. Do not run the
product in closed spaces or spaces with
no sufficient air flow.
Keep the product in good working order. Replace
worn or damaged parts.
Use caution when servicing blades. Wrap the
blade(s) or wear gloves. Replace damaged
blades. Do not repair or alter blade(s).
If equipped, disconnect spark plug wire(s) and
the negative battery cable before making any
repairs.
For best performance and safety, do
maintenance on the product regularly as given in
the maintenance schedule. Refer to
schedule on page 18 .
Electrical shocks can cause injuries. Do not
touch the cables when the engine is on. Do not
do a function test on the ignition system with your
fingers.
Let the product become cool before you do
maintenance near the engine.
The blades are sharp and can cause cuts. Wind
protection around the blades or use protective
gloves when you do work on the blades.
Do not turn the engine over if the spark plug or
ignition cable is removed.
Make sure that all nuts and bolts are tightened
correctly and that the equipment is in good
condition.
Do not change the adjustment of governors.
If the engine speed is too high, the product
components can become damaged. Refer to
Technical data on page 31 for highest permitted
engine speed.
The product is approved only with the equipment
supplied or recommended by the manufacturer.
The exhaust fumes
Maintenance
13

Publicidad

loading

Este manual también es adecuado para:

Xcite z380